Corner Network: 
 Network, also known as corner corner bead, corner bar, moldings, trim close. The expansion of the wings with a solid combination of plaster, stucco works in the water chestnut can form a straight line edge to resist cracking or cracking, and to protecting and reinforcing the most vulnerable part of the plaster, its network wing can be in any one of the ridge firmly anchored into the side of the full depth of the mud plaster. And completion of construction of buildings used in the corner most likely to be stricken plaster damage, the use of corner bead to form a smooth, straight, simple corner, while protecting the corner to prevent rupture, and because of its easy construction, saving a lot of time. 
 Existing band-edge corner bead, corner bead general, a variety of materials available 
 Corner mesh network is mainly used for construction of the wall from the strong role. 

 Standing length :2.4-3m, according to customer requirements 
 Usage: 
 A first in the wall bar with lime putty and smooth walls: 
 2 and then even this type of corner bead attached to the force at the surface of the cement is dry, full of cement and sand in the overflow from the hole, smoothing, wiping straight. Note that alignment of the direct contacts, the phenomenon can not appear convex and concave; 
 3 At this point the wall corner bead should be snapping if loose fixed with nails or caulk, then Angle Bead faintly visible; 
 4 In the brush a layer of mortar (putty) and smooth; 
 5 let it air-dried, slightly polished with sandpaper; 
 6 Finally, paint brush, paint or other wallpaper.